Refractory High Alumina Universal Arc Firebrick

Product introduction of high alumina universal arc firebrick

The high alumina universal arc refractory brick is mainly used as the lining of the steel ladle, which is one of the necessary common bricks for the steel ladle. It has good applicability and expandability. Different specifications of products can be used for different sizes of steel buckets and efficient masonry methods can be selected.

Features of high alumina universal arc firebrick

No deformation
High fire resistance
Regular appearance
Good spalling resistance
No peeling and strong corrosion resistance

Applications of high alumina universal arc firebrick

  • High alumina universal arc refractory bricks have roundness at both ends, which can be adjusted by moving back and forth during bricklaying, so it is convenient to lay refractory bricks, and the brick joints can generally reach 1mm.
  • The vertical joint of universal arc brick is smaller, which is 70% less than that of standard refractory brick. Thus, the erosion effect of molten iron layer moving up and down and penetrating into the joint can be corrected.
  • Due to the improvement of refractory brick quality, the thickness of lining brick can be reduced, and the capacity of steel ladle can be increased accordingly.
  • Due to the long service life and convenient bricklaying, the labor force for laying steel drums behind the furnace is reduced and the utilization rate of steel drums is improved.

Parameters of high alumina universal arc firebrick

Al2O3 % ≥5565758078
Fe2O3 % ≤---22
Refractoriness under load 0.2MPa, °C14701490151015301550
Apparent Porosity % ≤2228282421
Cold Crushing Strength MPa ≥4535405070